Descripción

You receive the GERBER files for the board and information for everything you need to make your own 7 segment display with serial control. This will give you a working final product. 

• Version: 1.2
• Certificate: Non-Commercial Use
• PCB size: 80 x  133mm
• Voltage: 5V
• Serial control: Yes
• Library: Adafruit neo pixel
• Color: Any (depends on LEDs)

This is the version with through hole LEDs. This is a huge 7 segment display. I mean is not huge, but compared with a common 7 segment display module, this one is quite big. The board is 80 by 133 mm. But that’s not the best part of this project. This PCB is controlled in series using just one data pin. If you ever used this WS 28 11 addressable LED strips, you will know how this 7-segment display PCB works as well. Because this one is controlled by the same chip. Actually, 3 chips because each IC could control 3 segments and the PCB has a total of 8 segments including the decimal point. Not just that, but you could place multiple modules in series and control all of them just with one data cable, because the data out from one module is the data in of the next one and so on, so you could place 10 modules in series if you want, all controlled by one data signal from the microcontroller.

*Once you make the order, go to your «My account» -> DOWNLAODS, select the order and then click the Download link on the right side and the file will be downloaded. 

You receive

• 1 x GERBER files for PCB V1.2
• 1 x Arduino code V1.1
• 1 x Part list for all components (with eBay links)
• 1 x Schematic
• 1 x Full tutorial website LINK
• YouTube video link for tutorial LINK