A few weeks ago I've made this radio controller based on Arduino and the NRF24 radio module. Now we can see how to use it. We start with something easy. Servos are controlled with PWM signal. What we do is receive the radio signal, crewte PWM signals and control the servo turret. We als... view more

• RC
• Radio
• servo
• DIY
• 3D
• tank
• Arduino
• NRF24

Recently, I came across the RDA5807 module which is an FM Radio Tuner in a very tiny package. It is very cheap and uses I2C protocol for communication which means that only two wires will be required to talk to the IC. Less w... view more

• FM
• Radio
• Arduino
• 3D
• DIY

In this tutorial we will merge all the parts seen in these past tutorials here. In those tutorials we have seen how to measure resistance, current, indcutnace and capacitance. Measure voltage is very easy. In this tutorial we make a 5 in 1 multimeter based on an Arduino, an ADC module and an... view more

• Arduino
• multimeter
• homemade
• 3D
• OLED
• DIY

This, is version 2 of my very powerful coilgun. As you can see, is huge and it has quite some power and works with high voltage, so please, I can’t stress this enough. Never touch the high voltage parts, stay insulated, use proper tools and if you don’t know what you’re doing... view more

• coilgun
• bullet
• 3D
• printed
• PCB

For a while I’ve been watching PET bottles filament maker projects on YouTube. There are a lot of them, and I have to say, it is a very interesting project and I wanted to make one as well. So, following the same steps and ideas, I’ve made the design, made a schematic for a PCB, 3D... view more

• recycle
• homemade
• 3D
• extruder
• filament

DIY Chronograph project. This is the font code for the arduino DIY chronograph. More instructions will be avaliable soon, as well as part list and STL files for it. A vídeo is beeing made by me to show how to build, program and use the chronograph with the Andr... view more

• chronograph
• detector
• measure
• bluetooth
• 3D

I've seen this idea on twitter and I wanted to make a homemade one. Is a nice product as humidifier but also as a huge smoking capacitor. You can 3D print it and make the same project with ultrasonic mist generator. Get the 3D files, the schematic and the part list from below and make your... view more

• 3D
• 3D printed
• humidifier
• ultrasonic
• Arduino

This is my 3D candle LED design that can be used for decoration purposes. The design STL file can be downloaded from the link bellow:

https://www.thingiverse.com/thing:5253695

Youtube Video Link:

https://youtu.be/m5ILpJv-ESA

• 3D
• 3d printing
• LED
• candle
• led candle

this is a 3d printed prosthetic arm that uses emg sensors for input. the hand is 3d printed in petg material. the electronics is controlled by an Arduino Nano, which takes input from a emg sensor that is used to control the fingers.each finger is controlled by strings connected to a ser... view more

• DIY
• ARDUINO
• prosthetics
• 3D
• 3d_printing
• petg
• circuit
• diy_pcb

We are going to buil a nice and fun radio controlled airplane. To make this project even better we are going to 3D print a real replica of the war Spitfire plane. If you don't have a 3D printer, there will be other tutorials on how to build a plane out of wood, foam or cardboard. The rest of the ... view more

• 3D
• plane
• 3D printed
• spitfire
• RC
• radio control

COVID-19 can seem like a paper tiger, when looking at bare mortality rates. The far greater problem is the increase in fatalities as health systems are stretched to the limit. With thousands of patients presenting all at once, hospitals quickly run out of beds and resources and suddenly, normally... view more

• respiratory
• COVID-19
• 3D
• 3D printed
• valve
• coronavirus
• COVID

In this tutorial we will see how to make a Magic 8 ball with the Arduino. This is based on the real magic ball which is based on liquid and floating principle with a plastic dice with 20 answers inside. Once you shake the ball, a random side of the dice will get on top of the black liquid and a r... view more

• magic 8
• ball
• 3D printed
• 3D
• Arduino
• DFplayer
• OLED
• screen
• DIY

En un tutorial anterior que puede encontrar en este enlace , hemos visto cómo hacer un controlador de radio basado en Arduino con múltiples canales. Luego, hemos visto en este otro tutorial , cómo usar ese controlador y mover servos para una torreta impresa en 3D. ... view more

• 3D
• coche
• bluetooth
• mando
• DIY
• Arduino
• casero
• RC
• control
• Radio

This is a very simple project that uses the Adafruid library to control a RGB adressable LED strip that will eb inside of a Daft punk Helmet. In this tutorial you will find the STL files to 3D print the plastic helmet, the schematic for the LED control with Bluetooth and the Android App that I've... view more

• RGB
• helmet
• 3D
• 3Dprinted
• Arduino
• bluetooth
• DaftPunk
• WS2812

In my free time I experiment a lot with 3D printers and microprocessors. Since commercial 3D printers can print only different types of p... view more

• DIY
• 3D
• 3d printer